Sales & Support: Request A Quote
Home ProductsSlitting and rewinding machine

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, paper slitting and rewinding machine

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, paper slitting and rewinding machine

large.img.alt

Product Details:

Place of Origin: China
Model Number: ZST-2500

Payment & Shipping Terms:

Minimum Order Quantity: 1 set
Packaging Details: Wooden Case
Delivery Time: 60 days
Payment Terms: T/T
Supply Ability: 10 sets/Month
Contact Now
Detailed Product Description
Slitting Machine: Shelf Type PLC Controlled Paper Slitter Max Jumbo Roll Width: 2500mm
Min Jumbo Roll Width: 400mm Paper GSM Range: 80-450g
Diameter Of Roll: Ø2000mm Diameter Of Rewinding: Ø1200mm
Unwind Diameter Of Paper Core: 3’’ And 6’’ Rewind Diameter Of Paper Core: 3’’
Width Of Rollers: 2550mm Slitting Speed: 10-350m/min(according To Material)
Tolerance Of EPC: ≤0.1mm Range Of EPC: ±75mm
Min.width Of Produce: 50mm-2500mm

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, Jumbo Roll paper slitting and rewinding machine

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, paper slitting and rewinding machine

Slitting machine, Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500, Jumbo Roll paper slitting and rewinding machine is mainly used to slit stick paper, craft paper and other kinds of paper

 

Main mechanical configuration:

1. Main body unit:

1.1 Machine’s main body adopts 80mm thickness cast iron and steel structure.(cast iron after secondary operation and setting treatment). Holders adopt seamless steel tubes. Make totally machine stable.

1.2 Main driving roller adopts seamless steel pipe (after tempering, surface hardening, chrome plated,mirror surface, dynamic balance treatment). Servo motor driving.

1.3 Main driving press roller adopts rubber roll (nitrile-butadiene rubber)

1.4 Material guide rollers adopts steel rolls (aluminum alloy) and rubber roll (nitrile-butadiene rubber)

1.5 Driving mode of main body and rewind shafts adopt synchronizing wheel and belt.

 

 

2. Unwinding unit:

2.1 Unwind unit adopts shaft-less automatic hydraulic lifting up. Using special 3’’ and 6’’ chuck. Not damage the inside paper core. Left and right arms’ moving is through the guide rails and hydraulic cylinders.

2.2 Unwind hydraulic cylinder can lifting 3 tons paper weight. Easy operating and fast.

2.3 set bias adjustable device can fine tune left and right, forward and backward through hand wheel. Range is ±20mm.

2.4 Unwind tension’s actuator is 2 sets Italy brand RE pneumatic brake. through PLC and Japanese brand SMC proportional valve to achieve a constant tension.

2.5 EPC uses TAIWANESE brand PAUSOURCE corrective device, it can achieve guide function by material’s edge. Left and right moving is through servo motor and guide rail.

2.6 Material’s route adopts bridge type. Easy operating.

 

 

3. Rewinding unit:

3.1 Rewinds adopt surface rolling structure. 2 sides rewind shafts(A/B). Also can single shaft rewinding.

3.2 Rewinds back to front moving is through guide rail and pneumatic cylinders.

3.3. Rewind tension’s actuator is 2 sets servo motor. through PLC to achieve a constant tension.

3.4 Rewind press rollers are 2 steel roller(with mirror treatment)

3.5When slitting finish, hydraulic cylinders will automatic downloading paper to ground. Easy operating.

3.6 Slitting knives are controlled by pneumatic cylinder (10 sets circle knife). Can be fine tuned.

3.7 Equipped with a vacuum-type waste edge exclusion system, use the strong force adsorb the waste edge out away

 

Main technical parameter of Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500: 

Max Jumbo roll width 2500mm
Min Jumbo roll width 400mm
Paper GSM range 80-450g
Diameter of roll Ø2000mm
Diameter of rewinding Ø1200mm
Unwind diameter of paper core 3’’ and 6’’
Rewind diameter of paper core 3’’
Width of rollers 2550mm
Slitting speed 10-350m/min(according to material)
Tolerance of EPC ≤0.1mm
Range of EPC ±75mm
Min.width of produce 50mm-2500mm
Up circle knife dimension Ø125*70*50mm
Down circle knife dimension Ø100*70*20mm
Total power 80KW
Weight 20000Kg
overall dimension (L X W X H) 11000mm×4000mm×2200mm

 

Main configurationof Shelf Type PLC Controlled Jumbo Roll Paper Slitter ZST-2500:

PLC MITSUBISHI(JAPAN)
MAIN MOTOR INVERTER 1PCS YASKAWA(JAPAN)
REWIND MOTOR INVERTER 2PCS YASKAWA(JAPAN)
TOUCH SCREEN MCGS(CHINA)
EPC CONTROLLER PAUSOURCE(TAIWAN)
EPC DRIVER PAUSOURCE(TAIWAN)
EPC SENSOR PAUSOURCE(TAIWAN)
PNEUMATIC BRAKE 2PCS RE(ITALY)
MAIN SERVO MOTOR DANMA(TAIWAN)
REWINDING SERVO MOTOR 2PCS DANMA(TAIWAN)
MAIN PNEUMATIC ELEMENT AIRTEC(TAIWAN)
PROPORTIONAL VALVE SMC(JAPAN)
HYDRAULIC ELEMENT CHINA
ENCODER OMRON(JAPAN)
MAIN BEARING NSK(JAPAN)
FAN BLOWER CHINA
GUIDE RAIL TBI(TAIWAN)
AIR SHAFT FOR REWINDING 2PCS YUKE(CHINA)
LOW-VOLTAGE APPARATUS SCHNEIDER(FRANCE)
BUTTON AND SWITCH SCHNEIDER(FRANCE)

 

Spare part listof Shelf Type PLC Controlled Paper Slitter ZST-2500:

01 inner hexagonal spanner 1set 05 oil gun Pc
02 Monkey spanner 1pc 06 air gun 1pc
03 a-liner screwdriver 1pc 07 air tap 2pcs
04 Cross screwdriver 1pc 08 operation instructions 1pc

 

 

 

Contact Person:

 

Kaiyan Liang
 
Qingdao ZFC Trading Co.,Ltd
Room 3620, 88 Anshan 1st Road, Qingdao, China
Tel: 0086 532 5851 9016?
WhatsAPP: 0086 13906390477
WeChat: zfc-lky
liangkaiyan5507@126.com

Contact Details
Qingdao ZFC Trading Co.,Ltd

Contact Person: Mrs. Kaiyan Liang

Tel: 86-532-66968529

Fax: 86-532-66968529

Send your inquiry directly to us (0 / 3000)