|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 SET|
|Packaging Details:||Wooden Case|
|Delivery Time:||10 work days|
|Supply Ability:||20 Sets/Month|
|Fountain Solution Filtration System:||Dampening Water Filtration System||Capacity:||500L/H|
|Power Supply:||Single Phase, 220±10% 50/60Hz|
Dampening water filtration system FFP-500A for Technotrans, Baldwin, Royse Fountain Solution refrigeration recirculation
Dampening water filtration system FFP-500A is designed for Technotrans, Baldwin, Royse dampening refrigeration recirculation in KBA, ROLAND, KOMORI, SOLNA, MITSUBISHI, AKIYAMA, SAKURAI,etc sheet fed offset printing press.
It uses 3 stage filter system, UV lamp and PLC control system to efficiently filter the waste ink, particle and contaminants that affect the quality of the printing job, to disinfect the fountain solution, to display the pressure and track the fault of the filtration system.
Using FFP-500A Dampening water filtration system , we can improve the stability of fountain solution for consistent print quality and prolong the life of the fountain solution and reduce the cost of printing. It is friendly to the environment so it is really green printing.
1.Fountain Solution with more stable PH level and conductivity to keep the Fountain Solution clean and maintain high-quality printing and maximize production.
2.Reduced consumption of IPA and low production costs
3.Reduced consumption of fountain solution additives (leading to substantially longer fountain-solution service life)
4.Clean fountain solution and lower Fountain Solution disposal costs
5.Less time required to clean the Refrigeration and Circulator Dampening Cooling System and reduce press maintenance
6.Filter can be replaced independently when Refrigeration and Circulator Dampening Cooling System is running
7.Higher productivity of the printing machine
8.Environment friendly and really green printing
Stainless steel filtration net of inlet
Bubble deduct net of outlet
Stainless steel PRE-Filtration
Stainless steel water pump
Intelligent control and display
Fine pressure measurement
Automatic vent valve
Filter (6 pcs spare part)
Fuse (2 pcs spare part)
FFP-500A is designed for KBA, ROLAND, KOMORI, SOLNA, MITSUBISHI, AKIYAMA, SAKURAI,etc offset printing press.
Adapter is suitable for all power supply.
It is fine filtration to remove the impurity and keep the high printing quality.
UV lamp can disinfect the fountain solution.
Don’t change the water and don’t drain the water. It is friendly to the environment
Intelligent pressure measurement , control and display.
|Power Supply||Single Phase, 220±10% 50/60Hz 500W(500A)|
|UV Lamp||5W AC220V 50/60Hz|
|UV Light Wave Length||nm||253.7|
|Power of Pump||W||370|
FFP-500A can be used for :
|52/53/54/56/58 cm||1/2/4/5/6 color|
|62/64/65/66/72/73/74/75/78/79 cm||1/2/4/5/6 color|
|92/102/103/104/105/106 cm||1/2/4 color|