Place of Origin: | CHINA |
Model Number: | ZST-2500 |
Minimum Order Quantity: | 1 set |
---|---|
Packaging Details: | Wooden Case |
Delivery Time: | 60 days |
Payment Terms: | T/T |
Supply Ability: | 10 sets/Month |
Slitting Machine: | Frame Type Jumbo Roll Slitter And Rewinder Machine | Max Jumbo Roll Width: | 2500mm |
---|---|---|---|
Min Jumbo Roll Width: | 400mm | Paper GSM Range: | 80-450g |
Diameter Of Roll: | Ø2000mm | Diameter Of Rewinding: | Ø1200mm |
Width Of Rollers: | 2550mm |
Slitting machine, Frame type jumbo roll slitter and rewinder machine ZST-2500, Max Jumbo roll width 2500MM
Slitting machine, Frame Type PLC Controlled Jumbo Roll Paper Slitter and rewinder machine ZST-2500, Jumbo Roll paper slitting and rewinding machine is mainly used to slit stick paper, craft paper and other kinds of paper
Main mechanical configuration:
1. Main body unit:
1.1 Machine’s main body adopts 80mm thickness cast iron and steel structure.(cast iron after secondary operation and setting treatment). Holders adopt seamless steel tubes. Make totally machine stable.
1.2 Main driving roller adopts seamless steel pipe (after tempering, surface hardening, chrome plated,mirror surface, dynamic balance treatment). Servo motor driving.
1.3 Main driving press roller adopts rubber roll (nitrile-butadiene rubber)
1.4 Material guide rollers adopts steel rolls (aluminum alloy) and rubber roll (nitrile-butadiene rubber)
1.5 Driving mode of main body and rewind shafts adopt synchronizing wheel and belt.
2. Unwinding unit:
2.1 Unwind unit adopts shaft-less automatic hydraulic lifting up. Using special 3’’ and 6’’ chuck. Not damage the inside paper core. Left and right arms’ moving is through the guide rails and hydraulic cylinders.
2.2 Unwind hydraulic cylinder can lifting 3 tons paper weight. Easy operating and fast.
2.3 set bias adjustable device can fine tune left and right, forward and backward through hand wheel. Range is ±20mm.
2.4 Unwind tension’s actuator is 2 sets Italy brand RE pneumatic brake. through PLC and Japanese brand SMC proportional valve to achieve a constant tension.
2.5 EPC uses TAIWANESE brand PAUSOURCE corrective device, it can achieve guide function by material’s edge. Left and right moving is through servo motor and guide rail.
2.6 Material’s route adopts bridge type. Easy operating.
3. Rewinding unit:
3.1 Rewinds adopt surface rolling structure. 2 sides rewind shafts(A/B). Also can single shaft rewinding.
3.2 Rewinds back to front moving is through guide rail and pneumatic cylinders.
3.3. Rewind tension’s actuator is 2 sets servo motor. through PLC to achieve a constant tension.
3.4 Rewind press rollers are 2 steel roller(with mirror treatment)
3.5 When slitting finish, hydraulic cylinders will automatic downloading paper to ground. Easy operating.
3.6 Slitting knives are controlled by pneumatic cylinder (10 sets circle knife). Can be fine tuned.
3.7 Equipped with a vacuum-type waste edge exclusion system, use the strong force adsorb the waste edge out away
Main technical parameter of Frame Type PLC Controlled Jumbo Roll Paper Slitter and rewinder machine ZST-2500:
Max Jumbo roll width | 2500mm |
Min Jumbo roll width | 400mm |
Paper GSM range | 80-450g |
Diameter of roll | Ø2000mm |
Diameter of rewinding | Ø1200mm |
Unwind diameter of paper core | 3’’ and 6’’ |
Rewind diameter of paper core | 3’’ |
Width of rollers | 2550mm |
Slitting speed | 10-350m/min(according to material) |
Tolerance of EPC | ≤0.1mm |
Range of EPC | ±75mm |
Min.width of product | 50mm-2500mm |
Up circle knife dimension | Ø125*70*50mm |
Down circle knife dimension | Ø100*70*20mm |
Total power | 80KW |
Weight | 20000Kg |
overall dimension (L X W X H) | 11000mm×4000mm×2200mm |
Main configurationof Frame Type PLC Controlled Jumbo Roll Paper Slitter and rewinder ZST-2500:
PLC | MITSUBISHI(JAPAN) |
MAIN MOTOR INVERTER 1PCS | YASKAWA(JAPAN) |
REWIND MOTOR INVERTER 2PCS | YASKAWA(JAPAN) |
TOUCH SCREEN | MCGS(CHINA) |
EPC CONTROLLER | PAUSOURCE(TAIWAN) |
EPC DRIVER | PAUSOURCE(TAIWAN) |
EPC SENSOR | PAUSOURCE(TAIWAN) |
PNEUMATIC BRAKE 2PCS | RE(ITALY) |
MAIN SERVO MOTOR | DANMA(TAIWAN) |
REWINDING SERVO MOTOR 2PCS | DANMA(TAIWAN) |
MAIN PNEUMATIC ELEMENT | AIRTEC(TAIWAN) |
PROPORTIONAL VALVE | SMC(JAPAN) |
HYDRAULIC ELEMENT | CHINA |
ENCODER | OMRON(JAPAN) |
MAIN BEARING | NSK(JAPAN) |
FAN BLOWER | CHINA |
GUIDE RAIL | TBI(TAIWAN) |
AIR SHAFT FOR REWINDING 2PCS | YUKE(CHINA) |
LOW-VOLTAGE APPARATUS | SCHNEIDER(FRANCE) |
BUTTON AND SWITCH | SCHNEIDER(FRANCE) |
Spare part list of Frame Type PLC Controlled Paper Slitter and rewinder ZST-2500:
01 | inner hexagonal spanner | 1set | 05 | oil gun | Pc |
02 | Monkey spanner | 1pc | 06 | air gun | 1pc |
03 | a-liner screwdriver | 1pc | 07 | air tap | 2pcs |
04 | Cross screwdriver | 1pc | 08 | operation instructions | 1pc |
Contact Person:
Kaiyan Liang
Qingdao ZFC Trading Co.,Ltd
Room 3620, 88 Anshan 1st Road, Qingdao, China
Tel: 0086 532 5851 9016
WhatsAPP: 0086 13906390477
WeChat: zfc-lky
Email: zhengfangcheng@126.com
Skype: zhengfangcheng@126.com