MY800

AUTOMATIC DIE CUTTING AND CREASING MACHINE

1.     The kind of the machinery: Automatic Die-cutting and Creasing Machine

2.     Type of the machine: MY800

3.     Specifications:

4.Features.

a .Adopt programmable controller ,it is incorporated with fully automatic

Feeding, die-cutting ,delivery, obstacle indicating ,checking and measuring.

b. Using unique cam intermittent construction designed by computer which

ensures die-cutting precision and gripper bar’s processing stability.

c. The main motor is controlled by transducer, which achieves stepless

speed regulation and smooth operation.

d. The bearings and chain of main driving ,PLC, transducer and all kinds of

electric switches are imported ones with good quality.

e. Many sensors and safe devices are set on the machine to ensure the normal operation and human safety.

f. Adopt imported pneumatic clutch ,long life and low noise , breaking stable.

5.The list of main import units:

a. PLC Programmable controller: Omron,Japan

b. Main Motor: Chengbang , TaiWan

c. Circuit Breaker: Germany , Siemens

d. Contactor Switch: Schneider , France

e. Photo-electric Switch: Omron, Japan

f. Frequency Converter: Toshiba, Japan

g. Button Switch: Schneider, France

h. Programmable Controller: Omron, Japan

i. Limit Switch: Omron , Japan

j. Deceleration Mechanical and Electric Machine: Hanshin, Taiwan

k. Pnenmatic Components: SMC

l.       Main Chains :  RENOLD, Germany

m.  Bearing(main place): NSK, Japan

MY800 AUTOMATIC

DIECUTTING AND CREASING MACHINE

Features:

MY800 automatic die-cutting and creasing machine is mainly used for the die-cutting, creasing, cold and hot embossing of cigarette box, drug box, wine box and label in the packing and decorating industries.

This kind of machine is incorporated with fully automatic feeding, die-cutting,  delivering counting, obstacle indicating, checking and measuring. It has the features of easy operating, reliablity, high speed and precision.

Construction

This machine is made up of feeding, die-cutting, delivering and electrical units.

Features of units

1. Feeding unit

(1) Main and auxiliary feeding devices are used to accomplish non-stop feeding.

(2) Feeding head with special design ensures continuous feeding of sheets for different thickness and materials.

(3) It’s easy to operate adopting sheet-conveying frame which can be lifted up.

(4) Double-sheet detector is used to control double-sheet and reduce waste.

(5) There are 4 front lay installed 4 approach switches which are used to check if the sheet reach the right position, so the waste products are avoided, you can easily to adjust them through the knob outside the machine.

(6) Adjusting handwheel is installed on the feeding board which is used to mini-adjust the feeding time to coordinate the die-cutting time.

(7) The left and right side lay are used with two functions of push and pull, which is easy to change; the position and press of side lay can be adjusted to fit for the side registering of sheet of different size and thickness.

(8) Over-high preventing device is installed on the feeding head to prevent it from damage.

(9) Adjusting handwheel of lay is installed on both sides of feeding units, which is easy to locate pile.

(10) The feeding pile can rise up automatically.

(11) Up and down- limit switch are installed on inner side of wall frame, ensuring the pile can stop automatically at the highest or lowest location.

2. Die-cutting unit

(1) The machine can keep running stable even under high speed and long life by adopting the driving of big modulus worm shaft and worm wheel.

(2) 230º big angle intermittent device is used to ensure the running stability, low noise and long life.

(3) The die-cutting frame is used to install die-cutting plate, the quick-locking device on it can easily lock die-cutting plate of any size.

(4) The die-cutting frame is installed on the machine, it has precise registering system and easy to lock or loosen, it can be turned over to change or adjust die-cutting plate with the use of supporting arm.

(5) The registering system accomplishes re-registering of sheet from the front and side direction, ensuring high precision of die-cutting.

(6) The steel plate is made of high hard and elastic materials, smooth and durable, it also has registering device to ensure exact registration.

3.  Delivering unit

(1) It accomplishes automatic delivery.

(2) Delivering railings ensures non-stop delivery, when the pile reaches a certain height, insert the railings into the pile then you can change the pile without stopping the machine.

(3) Side and back joggers ensures the neat of delivery, delivering brush and turning plate can avoid quivering and loosening of sheet, every position of device can be adjusted to fit processing of different layout.

4. Electrical unit

(1) The electrical system adopts such advanced control devices as PLC, Interface.

(2) The interface monitors the input, output points of PLC, all kinds of troubles, double languages(Chinese, English) make the workers convenient to operate machine or solve stoppage.

(3) The main motor is controlled by varispeed, running stable and saving electricity.

(4) The main driving adopts pneumatic brake, running safe and reliable.

(5) Many photo-electric switch are installed at the feeding, die-cutting and delivering unit, which ensures the safe running of machine.

(6) Multi-indicating lamp indicate different condition of machine, alarm the operator to ensure the safety.

(7) The machine sets many operating panels in order to control it from different place such as feeding unit, driving side, operating side and delivering unit.

(8) The machine adopts three phase, four wires, power supply for AC, 380V, 50HZ, equips special safe wire PE.

(9) Safe switches are set on every unit, which ensures safe operating, the safety facilities coincide CE standard of Europe.

1,Enclosure